Snapper SC60V User Manual

1
ENGLISH ESPAÑOL
60V Cordless Chainsaw
SC60V
Instruction Manual
Manual de Instrucciones
Please do not return product to retailer.
Por favor, no devuelva el producto al lugar de compra.
1-800-317-7833
www.snapper.com
:
ADVERTENCIA:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
Lea el manual de instrucciones y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en
lesiones graves.
WARNING
Rev. 01 11/19/15
SNAPPER IS A TRADEMARK OF BRIGGS & STRATTON POWER
PRODUCTS GROUP, LLC AND IS USED UNDER LICENSE
Not for Reproduction

Snapper SC60V Specifications

General

Brand	Snapper
Model	SC60V
Category	Chainsaw
Language	English

Summary

Identification of Safety Symbols

Product Specifications

Safety Rules

Work Area Safety

General safety practices for the work environment.

Kickbacks

Information about kickback hazards and prevention.

Electrical Safety

Precautions related to electrical hazards.

Battery Use and Care

Guidelines for battery charging and usage.

Personal Safety

Guidelines for the operator's personal safety.

Specific Safety Warnings

Focused safety advice for chainsaw operation.

Chainsaw Use and Care

Instructions for operating and maintaining the chainsaw.

Assembly

Installing the Bar and Chain

Step-by-step guide for installing the bar and chain.

Battery Installation

Adding Bar and Chain Lubricant

Operation

Starting and Stopping the Chain Saw

Procedures for starting and stopping the chainsaw.

Proper Cutting Stance

Preparing for Cutting

Work Area Precautions

Basic Operating/Cutting Procedures

Felling Trees

Hazardous Conditions

Bucking

Limbing

Proper Procedure for Tree Felling

Cutting Springpoles

Maintenance

Adjusting the Chain Tension

How to properly adjust the chain tension for optimal performance.

Chain Maintenance

Top Plate Filing Angle

Sharpening the Cutters

Instructions for sharpening the saw chain cutters.

Side Plate Filing Angle

Replacing the Guide Bar and Chain

Side Plate Angle

Maintaining the Guide Bar

Troubleshooting Table