INTRODUCTION
We designed the Basis 300 for maximum output in
an incredibly compact enclosure. With bass exten-
sion to 25Hz (-3dB) and output over 105dB at a
typical listening position in a 3,000 cubic-foot
room, the Basis 300 meets the demands of digital
5.1 formats. Yet, the Basis 300 is so compact, it
easily fits within a typical AV cabinet.
Tuned for Flexibility
We tuned the Basis 300 to match the speed and
sonic presentation of the Snell K7 and LCR7.
We included a system-specific
electronic crossover that automatically adjusts the
output of your front speakers, so you are assured
of a seamless blend between the Basis 300 and
your LCR7 or K7 speaker systems.
Plus, we incorporated a number of user-definable
settings, giving you the flexibility to fine-tune the
Basis 300 to match your existing system.
INTRODUCTION
Specification Basis300
Frequency Response (
±
3dB) 25-150Hz
Amplifier Power 300 watts
Crossover Low Pass for Subwoofer Variable from 50 to 180 Hz
Crossover High Pass for Line Out Fixed at 80Hz, 12dB/octave
Bass Unit 10-inch (250mm) custom-built bass unit with
treated paper cone and die-cast
aluminum chassis.
Cabinet Construction
3
⁄
4
-inch MDF.
Internal Double-H bracing.
Controls Phase Switch
Turn On switch with instant On, and
ten-minute Off delay
Top mounted volume control
Dimensions (HxWxD) 15.5"x 15 x 15"
41cm x 40cm x 40cm
Weight 69lbs
Finish Hand-sanded, hand-painted
Black walnut or cherry veneer
To Next Page
Loading...
