9
CONNECTING TWO ICS Sub 24 mk3’s
You may wish to use two ICS Sub 24mk’s, particularly if you are in a large room.
u
Double subwoofers may be wired
with either speaker-level or line-level
connections.
u
Be sure the Phase Switch is set the
same on both units.
To connect two ICS Sub 24 mk3’s using
line-level inputs, use “Y” connectors to
daisy chain the ”PREAMP OUT“ signal to
the input of a second ICS Sub 24 mk3.
To connect two ICS Sub 24 mk3’s using speaker-level inputs, use the ”HIGH LEVEL INPUTS“ binding posts on one sub-
woofer to daisy chain to the second ICS Sub 24 mk3.
To Next Page
Loading...
