EasyManua.ls Logo

Snom A150 - Page 7

Snom A150
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
en
Important Information
Safety precautions
Please read these precautions and the instructions on setting up and
using the product thoroughly before using the device. Save this info
sheet and do not give the device to third parties without it.
Privacy. Telephone calls are transmitted between the base station
and the headset by radio waves, so there is a possibility that your
wireless headset conversations could be intercepted by radio receiving
equipment within range of the headset. For this reason, you should not
think of wireless headset conversations as being as private as those on
corded telephones.
Charger, power adapter, and headset with non-removable battery
CAUTIONS:
Use only the power converter (AC/DC adapter) delivered with the device.
Other power power supplies may damage or even destroy it.
EU: Ten Pao International Ltd., model no. S004LV0600045, or
VTech Telecommunications Ltd., model no. VT04EEU06045
UK: Ten Pao International Ltd., model no. S004LB0600045, or
VTech Telecommunications Ltd., model no. VT04EUK06045
The headset contains a non-removable, rechargeable Li-Ion battery,
3.8V 185mAh 0.7Wh, supplier GP Batteries, Ltd. Do not open the
headset and attempt to replace the battery!
Placement of charger and cord, operation of USB stick and headset
Warning: Install power adapter near the equipment and easily
accessible.
Avoid placing the device‘s cord where people may trip over them.
Avoid placing the cord where it may be exposed to mechanical
pressure as this may damage it. If the power supply cord or the
plug is damaged, disconnect the device and contact qualified service
personnel.
The device is for indoor installation only. Not for outdoor
installation!
The operational temperature is between 0 °C to +40 °C (32 °F to
+104 °F), humidity not exceeding 95% and non-condensing.
Do not install product in rooms with high humidity (for example,
in bathrooms, laundry rooms, damp basements). Do not immerse
product in water and do not spill or pour liquids of any kind onto or
into any parts of it. If the product comes in contact with any liquids,
unplug any line or power cord immediately. Do not plug the product
back in until it has dried thoroughly.
Do not install product in surroundings at risk for explosions and do
not use the handset in such surroundings (paint shops, for example).
Do not use the headset if you smell gas or other potentially ex-
plosive fumes!

Related product manuals