1.
2.
3.
4.
1.
2.
3.
4.
5.
How do I pair the A190 headset with an Mxxx series DECT
handset
It is possible to operate the headset as a device or to the headset with an handset registered at the base station. This works for all A190 stand alone pair
the handsets and base stations on the M-series, so and working on and (for the M300 there are some M25, M65, M70, M80, M85 M90 M700 M900
additional steps to be taken, reported at the bottom of this guide).
The headset will get the same extension number as the handset.
Open the of your DECT base.user interface
On the " " page, click on the IPEI of the the , the page will open and you will be able to pair the devicesextension A190 A190 handset
In the pull-down list of " ", select the " " of the .Paired Terminal Terminal Idx handset
When you click on " ", the headset is now registered with the same extension number as the handsetSave
PAIRING THE A190 ON AN M300
To make this work on an M300 you would need to disable the Local Call Groups option, please follow these steps
Go the " " pageConfiguration
Click on the " " button, save the file and open it with an editor like Notepad++ (do not use Windows' Notepad)Export
Change the following setting to " ": off <allow_call_groups>off</allow_call_groups>
Get to the web user interface " " page againConfiguration
Click on the button " " and select the changed filebrowse
Now you should be able to follow the above steps and pair the with any handset you need on the .A190 M300
Related articles
Configuring multiple SIP Extensions with an M-series DECT handset
Further Information
VoIP Essentials
Visit the Snom Forum
Open a support ticket
Find a local partner
To Next Page
Need help?
General
Weight and Dimensions
