10
Measuring body temperature in the ear
1. Press the EAR button for 1 second to switch the
thermometer on. Following a successful self test, the
device emits two short beeps.
2. Remove the cap by gently
lifting the front of cap
upwards (1) while
simultaneously pulling it off
forward (2).
3. Make sure that the sensor tip and also the ear canal
are clean. As the ear canal is slightly curved, you
have to pull the ear slightly up and backwards before
inserting the sensor tip. This is important so that the
sensor tip can be pointed directly at the eardrum.
4. Insert the sensor tip carefully and press the EAR
button for 1 second.
5. Release the EAR button. The end of the measuring
time is signaled with a short beep and the measured
value appears on the display and is spoken.
To Next Page
Loading...