turned off;
2. Rotate the outer knife net assembly counterclockwise to remove the outer knife
net assembly;
3. Press up the inner knife net assembly upwards. The cutter head is sharp and easy
to hurt the hand. Be careful of scratching when pulling out the cutter head,
4. Wash the cutter head and net cover with water
5. Put the inner knife assembly back, gently press it, then press the outer knife net
assembly clockwise.
* It is recommended to replace the cutter head every two years to ensure the ideal
shaving effect; when worn or damaged, please replace it with our special cutter
head.
To Next Page
Loading...