Soaiy S68 - Page 6

2,Alarm Clock Cycle selection: Short press the “AL-I”switch to alarm
clock cycle selection status,now the led screen will display “ONE”or “ALL”, then
rotate “AL-Ⅰ”key to choose “ONE”for once alarm (the cycle icon will not bright),
then it will not alarm again. To choose“ALL”,the cycle icon will always
bright.(The alarm clock will ring at the specified time everyday)
3, When you setting the time, if you can not complete the setting within 15s, it will
automatic save and exit time setting status.
4, At any mode,long press “AL-Ⅰ”key can turn on/off the alarm. (the alarm clock
icon will not bright )
5, The ring time of alarm clock will last one minute, when the alarm clock is ringing,
you could press any button of the machine to turn off it.
Tips: The setting step of AlarmⅡ same as above.
三，Charging instruction
1，When you hear “Low battery”, it means that the power of product is not enough,
at any time may automatically shutdown, please recharge in time.
2，Use the standard USB cable to charge.
3，The light will be red in charging status,after charging completed, it will out.
4，Please choose the 5V/1A adapter for charging.
Warm Tips: Please try to charge in the shutdown state to avoid causing interference
and unnecessary danger.
四、Product specification
Material
Wood+Plastic
Display mode
LED dot Matrix lamp
Audio input mode
Support AUX、U disk、TF card、Bluetooth、FM
TF Card
Maximum Support 32GB