Batteries
Because of storage isssues your DIT 400 is not supplied with
batteries.
ALWAYS REMOVE THE TEST LEADS BEFORE REPLACING
BATTERIES.
Just 4 AA cells are required (alkaline recommended). The battery
compartment is at the the back of the instrument, remove the screw
(do not lose it) - slide the battery cover off and carefully insert
batteries observing correct ploarity. Replace cover and fix screw back
in.
4 good quality AA alkaline cells should give 5000 tests at 500V DC.
Note: Access to the protective fuse is also gained through the
battery compartment. Always replace with the correct type -
F 500mA Fast Blow Ceramic 500V.
To Next Page
Loading...