Need help?Do you have a question about the Socomec Sicon DELPHYS MX elite and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Efficiency | Up to 96% |
| Topology | Double conversion |
| Input Voltage | 400 V |
| Output Voltage | 400 V |
| Battery Type | VRLA |
| Communication Interfaces | RS232, Ethernet |
| Standards | IEC 62040-1, IEC 62040-2 |
| Operating Temperature | 0 to 40°C |
| Dimensions (W x D x H) | Varies depending on the power rating. Consult the datasheet for specific dimensions. |
| Weight | Varies by model (e.g., 800 kg for a typical 100 kVA model) |
| Humidity | 0% to 95% non-condensing |
Outlines conditions for safe equipment use and electrical connections.
Advises on safe handling by trained personnel and operational precautions.
Guides through the procedure for starting a single UPS unit.
Explains how to manually switch the load from the inverter to the mains.
Details the process of transferring the load from mains to the inverter.
Describes how to transfer the load to maintenance bypass for servicing.
Guides the user through the startup procedure for a modular UPS system.
Explains how to transfer the load from inverter to mains in a modular system.
Details the process of transferring the load from mains to inverter in a modular system.
Describes system shutdown to maintenance bypass for two redundant units.
Guides shutdown to maintenance bypass for non-redundant or parallel units.
Provides the step-by-step procedure for shutting down individual UPS units.
Explains how to safely uncouple a single unit from the common busbar for servicing.
Guides the procedure for starting the central bypass UPS system.
Explains the inverter to mains load transfer for the central bypass system.
Details the mains to inverter load transfer for the central bypass system.
Guides the shutdown process to maintenance bypass for the central bypass system.
Provides details on the results and schedule of battery tests.
Lists the prerequisites for initiating a battery test.
Explains how to schedule automatic battery tests.
Guides on how to start a battery test manually.
Explains how to interpret diagnostic codes for troubleshooting UPS failures.
To Next Page