socomec ATyS C55 - Metering and Power;Energy Data

32
EN
ATySController C55/65 - 549866C - SOCOMEC
11.4. Metering
Allows the user to visualize detailed metering information on the load side.
U: Phase –Phase voltage.
V: Phase-Neutral voltage.
F: Frequency.
SYS: Voltage, frequency and current of the system.
I: all currents measured (current sensors need to be connected to use this function).
11.5. P&E
Allows the user to visualize the power and energy used by the load. (Current sensors must be used to enable this function).
The information can be shown in numerical or both numerical and bar graph.
SYS:System information including Ptot (total active power used), Qtot (total reactive power used), Stot (total power
used) and PFtot (power factor).
P: Active power phase by phase.
Q: Reactive power phase by phase.
S total apparent power phase by phase
Pf: Power factor phase by phase.
Ea: Active energy.
Er: Reactive energy.
Es: Apparent energy.
RST E : Resets the energy measured.