socomec ATyS C55 - PASSWORDS

67
EN
ATySController C55/65 - 549866C - SOCOMEC
14.1.8. PASSWORDS
The controller considers there are 4 levels of user who can use it, so it uses 4 level of security:
• Standard user – it requires no password and it permits the visualization of the parameters and values measured by the
controller through the dashboards. It is the level by default and if another user stays away from the controller for more than
5 minutes with no actions, the security level will become Standard user automatically.
• Operator - it requires the Operator password (by default 4000, can be changed in the Congurator level inside
Parameters). It allows changing the operating mode, sending position orders to the switch and setting the engine
exerciser parameters and alarms.
• Congurator – it requires the Congurator password (by default 1000, can be changed). It allows to change any
conguration of the controller (operating range, timers, type of control, display settings, etc)
• Maintenance – It’s the highest level of security. It requires the maintenance password (by default 1010) and it permits
resetting counters, rebooting the device, changing and restoring passwords of other users and entering inspection date
and telephone number.
Passwords by default (factory settings):
User (access to visualization ) No password
Operator (access to control functions) 4000
Congurator (access to parameter setting) 1000
Maintenance (access to service menu) 1010
These default passwords can be changed in the Parameters / Passwords menu (Congurator or Maintenance access).
WARNING ! If the maintenance password is lost it cannot be restored. Please contact SOCOMEC in case
this operation is needed.