socomec ATyS C55 - Maintenance Menu

74
EN
ATySController C55/65 - 549866C - SOCOMEC
14.2.12. COMMIT
The commit function is used to force the transfer to the secondary source after loss of the priority source in the eventuality
that source 1 returns before the transfer has been done.
See graphic below for COMIT function logic:
14.3. Maintenance Menu
The maintenance menu permits to perform service-reserved actions on the controller:
- Reboot device: permits a software reboot on the controller without erasing any information.
A conrmation request will pop up when pressing OK on the function.
- Erase Logs: erases the event log or the alarm log. A second conrmation will be required.
- Reset counters: resets to 0 the counter values (switch, time in position, operational hours or genset statistics)