socomec ATyS C55 - MAINTENANCE; Controller Information and Faults

77
EN
ATySController C55/65 - 549866C - SOCOMEC
15. MAINTENANCE
15.1. About the controller
All the main information about the controller can be directly found inside the ABOUT menu, accessible through the main
menu of the controller:
- PRODUCT TYPE: Model of the product (ATyS C55 / ATyS C65 )
- LAST INSPECTION: This date is modied in the MAINTENANCE MENU / INSPECTION MODE by the service team by
adding the new INSPECTION DATE after servicing the product for the rst time. If there is no modication of this parameter,
by default it will show “01/01/00 00:00”
- SERIAL NUMBER: Serial number of the product. The number can also be found on the top marking of the product as “Nº
S/N” followed by a number. This number might be asked by Socomec service team whenever technical support is required.
- FIRMWARE VERSION: Version of the controller rmware. This will only change in case of a product rmware upgrade, done
by an authorised Socomec service team.
- COMMUNICATION ADDRESS: Modbus RTU communication address for the controller. It can be set through the wizard or
inside the COMMUNICATION parameters (see chapter 11.1.6)
- MAINTENANCE TEL: This value is congurable inside the MAINTENANCE menu / INTRODUCE PHONE NUMBER option
to integrate inside the ABOUT menu a phone number by the user related to the maintenance of the product (for example,
Socomec’s contact number or the maintenance manager in contact with the service team number).
Product references:
Part Number Image Description
1600 0055
ATyS C55
ATS Controller with mid-level
functionalities
1600 0065
ATyS C65
ATS Controller with advanced
functionalities