socomec ATyS g M - Bridging Bars (4 P); Terminal Shrouds Installation; Sealable Cover Installation

ATySgM - 542933D - SOCOMEC
24 EN
10. INSTALLING WITHIN THE ATYSM ENCLOSURE
10.1. Modular plastic enclosure
Ref. 13099056
Dimensions and mounting (for 2P ATyS M products only)
The enclosure must be wall-mounted using screws (not supplied). Recommended size: M6 50 mm (minimum).
Weight : between 8 and 10 kg, depending on the accessories.
Only 1 aux contact block may be installed when using this enclosure.
410 mm
305 mm 150 mm
230mm (M6)
325mm (M6)
Load Mains Genset