21
EN
6.1. Manual operation
The ATY
and performance of the power switching function. This function is usually used in case of emergencies or during
maintenance.
To operate the ATYS manually ensure that no live parts are accessible, turn the front selector switch to the manual
CAUTION
Ensure to verify the product position and
direction of rotation before effecting manual
operation.
With the handle inserted into the manual
is blocked on manual.
Ensure to remove the handle from the product
before turning the selector switch back towards
6.2. Padlocking
The ATYS can be padlocked in the 0 position. This is usually used during maintenance interventions.
To padlock the ATYY
YS padlocking mechanism.
3x
Ø 4-8 mm
Ø
0.15-0.31 in
CAUTION
Padlocking is only made possible in the “O position”, when in manual mode and
with the emergency handle not inserted.
To Next Page
Loading...
