23
EN
6.3.2.2.
Motorisation Module
60ms
Terminal connector:
Thighten torque:
6.3.2.3. Control logic
YS.
Y
Impulse logic:
The ATY
receiving an impulse order.
A switching command of at least 60 ms is
necessary to initiate the switching operation.
order I
position I
order 0
position 0
order II
position II
Impulse logic
The ATY
long as the order is maintained.
(1st order received is held until no longer
maintained).
(With the power supply available).
maintened
order I
position I
order 0
position 0
order II
position II
Contactor logic
To Next Page
Loading...
