EN
6.3.3. Fixed outputs - Dry contacts
6.3.3.1. Description
As standard, the ATY
motorisation module.
6.3.3.2.
The ATY
6.3.3.3.
This contact gives constant feedback about the product’s availability and it’s capacity to transfer from the main
supply to the alternative.
The ATY
YS is operational in terms of control inputs. Should one of
YS motorisation module become
ATY
Conditions that render the
ATyS motorisation unavailable
Comments Relay
Open
Manu
LED ON
detected
voltage is outside the acceptable
ranges
for 1 minute after which it will automatically reset
test
The software will automatically & periodically test these
reached
ATyS detects a motorised position change.
unavailable for as long as this contact remains closed.
Action done by the user with the mode selector switch.
contact will be open.
To Next Page
Loading...
