EN
2. INTRODUCTION
ATYS transfer switches are designed for use in total system optional standby power applications for the safe
transfer of a load supply between a normal and an alternate source. The changeover is done in open transition and
11 and other international TSE standards as listed.
The ATY
ATYS transfer switching equipment ensures:
A complete product delivered as a fully assembled and tested solution.
An inherent failsafe mechanical interlock.
(Manual operation is functional with and without the motorization in place).
Straight forward installation with effective ergonomics.
Genset Genset
ATyS
ATyS
ATyS
To Next Page
Loading...
