socomec DIRIS A41 - Technical Characteristics

53
DIRIS A40/A41 - Ref.: 535 747 A
CASE
Dimensions: 96 x 96 x 60 mm
or 96 x 96 x 80 mm with all optional modules (DIN 43700)
Connection: via 2.5 mm
2
disconnectable terminals
(voltage and others) and 6 mm
2
fixed terminals (current)
IP index: IP52 (front panel) and IP30 (case)
Weight: 400 gr.
DISPLAY
Type : Backlit LCD display
MEASUREMENTS
Three-phase (3 or 4 wires), two-phase (2 wire) and single-phase networks
VOLTAGE (TRMS)
Direct measurement: from 18 to 700 V AC (phase/phase)
from 11 to 404 V AC (phase/neutral)
Measurement via PT:
• Primary: up to 500 kV
• Secondary: 60, 100, 110, 115, 120, 173 and 190 V AC
Display and resolution from 0 to 500.0 kV
Permanent overload: 760 V AC
Update period: 1 second
CURRENT (TRMS)
Via CT with: • Primary: up to 9995 A
• Secondary: 1 or 5 A
Minimum measuring current 10 mA
Input consumption: < 0.3 VA
Display: from 0 to 11 kA (1.1 times the primary value)
permanent overload: 10 A
intermittent overload: 10 In / 1 second
Update period: 1 second
Maximum ratio KI x KU: 10 000 000
POWER
Total: 0 to 8000 MW/Mvar/MVA
Update period: 1 second
FREQUENCY
from 45,0 to 65,0 Hz
Update period: 1 second
AUXILIARY SUPPLY IEC / CE
110 to 400 V AC 50/60 Hz ± 10 %
120 to 350 V DC ± 20 %
12 to 48 V DC -6
% / + 20 %
Consumption: < 10 VA
OPERATING CONDITIONS
Operating temperature: -10° to + 55°C (14° to 131°F)
Storage temperature: -20° to + 85°C (-4° to 158°F)
Relative humidity: 95 %
GB
DIRIS A40 / A41
TECHNICAL CHARACTERISTICS
Shop for Power Metering products online at:
1.888.610.7664
www.PowerMeterStore.com