socomec DIRIS Digiware C-31 - Page 36

36 EN
DIRIS DIGIWARE DC - 545830B - SOCOMEC
Description of mode 1 Flashing LED LED continuously on
Auto-addressing available for:
DIRIS Digiware
Press
3 sec.
Press
3 sec.
4a 4b
7 7
5a 5b
3 3
Gateway
DIRIS G
≤ 180 sec
Press
3 sec.
1
Press
3 sec.
6
2
7
3
The DIRIS Digiware U, DIRIS Digiware I, DIRIS Digiware S, and DIRIS Digiware IO modules benet
from the autoaddressing mode.
The auto addressing can be launched from the DIRIS Digiware D-40 / D-50 / D-70 remote displays or
from the DIRIS G communication gateway.
The modules are always connected to the DIRIS G gateway via a DIRIS Digiware C-31 interface or via
a DIRIS Digiware D-40 display.
Note: During the auto-addressing process, the RS485 line is reserved for allocating addresses and no other
exchange of data is possible at this time.