socomec DIRIS Digiware C-31 - Combination of Alarms; System Alarm; Setting up Alarms; ALARM LED on Front

46 EN
DIRIS DIGIWARE DC - 545830B - SOCOMEC
11.1.3. Combination of alarms
• Up to 4 boolean combinations (OR, AND) on the dened alarms (electrical values, energy, inputs, etc.)
Example of conguring an alarm on a digital input via Easy Cong:
11.2. System alarm
If a saturation of voltage input is detected, an alarm will be automatically generated.
11.3. Setting up alarms
The system alarms are automatically detected and alarms upon events are congured with the Easy Cong
software.
There are several ways of identifying the presence of an alarm:
11.3.1. ALARM LED on front
• Blinking: Alarm system (priority on alarm upon events)
• Fixed: Event alarm
11.3.2. Activation of an output
• On the DIRIS Digiware IO-10 an output may be enabled when an alarm is detected
11.3.3. Activation of an input
• If an input is present, the alarm can be acknowledged from this input. Acknowledgement of an alarm can only be
taken into account if the alarm is complete
11.3.4. RS485 Modbus
• Information on the alarms with timestamping available via the RS485 communication bus
• Alarm acknowledgement
11.3.5. Display and WEBVIEW
• Information on the alarms with timestamping
• Alarm acknowledgement