Need help?Do you have a question about the socomec DIRIS Digiware I-60 and is the answer not in the manual?
General| Frequency Measurement Range | 45 to 65 Hz |
|---|---|
| Mounting | DIN Rail |
| Operating Temperature | -10 to +55 °C |
| Storage Temperature | -20 to +70 °C |
| Type | Power Meter |
| Measurement Type | Current, Voltage, Power, Energy, Frequency |
| Measurement Category | CAT III |
| Accuracy | Class 0.5 for active energy |
| Communication Protocols | Modbus RTU |
| Display | LCD |
| Protection Degree | IP20 |
| Weight | 300g |
Details risks associated with electrical hazards and the precautions required.
Outlines precautions to prevent damage to the device during operation and installation.
Explains the core concept of centralizing voltage measurement and distributing current measurement.
Details the various functions including measurements, quality, logging, metering, alarms, inputs/outputs, and communication.
Presents the different types of current sensors compatible with DIRIS Digiware.
Provides essential safety instructions and recommendations before commencing installation.
Details how to mount DIRIS Digiware modules using DIN rail or backplate.
Explains the DIN rail mounting procedure for DIRIS Digiware I-4x modules.
Details the back-plate mounting process for DIRIS Digiware I-4x modules.
Guides on installing TE solid-core sensors and their mounting accessories.
Guides on installing TR split-core sensors, covering cable mounting and casing.
Details the installation of TF flexible sensors, including casing and mounting.
Details the wiring and connection of DIRIS Digiware modules via the Digiware Bus.
Explains how to connect various types of current sensors to DIRIS Digiware modules.
Outlines the general concept for connecting current sensors to DIRIS Digiware.
Provides detailed RJ12 connection information for TE, TR, and TF current sensors.
Explains how to connect the DIRIS Digiware system to single-phase, two-phase, and three-phase networks.
Guides on calculating power supply requirements for the Digiware bus system.
Provides rules for calculating the maximum number of devices on the Digiware BUS.
Details connection rules when using the DIRIS Digiware C-31 system interface.
Explains connection rules for DIRIS Digiware D-50/D-70 remote displays.
Explains how to configure DIRIS Digiware using the Easy Config software.
To Next Page