socomec DIRIS Digiware M-70 - Binary Input Object; Binary Output Object

10 EN
BACNET PROTOCOL IMPLEMENTATION CONFORMANCE STATEMENT - 546539C - SOCOMEC
1.5.4. Binary Input Object
These objects are neither dynamically creatable using CreateObject service nor deletable using DeleteObject
service.
Such an object is part of a device object.
The way the OID is assigned to a Binary Input Object (instance number) is the following:
OID = LL00
• with LL = Index of the input of the device (starting at 1)
For example, Binary Input with OID 200 reects Input of corresponding device.
1.5.4.1. Optional Properties
Property Identifier ID Type Description Write
Description 28 String Measurement point Description NO
1.5.4.2. Proprietary Properties
None
1.5.5. Binary Output Object
These objects are neither dynamically creatable using CreateObject service nor deletable using DeleteObject
service.
Such an object is part of a device object.
The way the OID is assigned to a Binary Output Object (instance number) is the following:
OID = LL00
• with LL = Index of the output of the device (starting at 1)
For example, Binary Output with OID 200 reects output 2 of corresponding device.
The Present Property is writable directly.
1.5.5.1. Optional Properties
Property Identifier ID Type Description Write
Description 28 String Measurement point Description NO
1.5.5.2. Proprietary Properties
None