socomec DIRIS Digiware M-70 - Data Link Layer Options; Device Address Binding; Networking Options; Network Security Options

11EN
BACNET PROTOCOL IMPLEMENTATION CONFORMANCE STATEMENT - 546539C - SOCOMEC
1.6. Data Link Layer Options
BACnet IP, (Annex J)
BACnet IP, (Annex J), Foreign Device
ISO 8802-3, Ethernet (Clause 7)
ATA 878.1, 2.5 Mb. ARCNET (Clause 8)
ATA 878.1, EIA-485 ARCNET (Clause 8), baud rate(s) ________________________
MS/TP master (Clause 9), baud rate(s): ________________________
MS/TP slave (Clause 9), baud rate(s): ________________________
Point-To-Point, EIA 232 (Clause 10), baud rate(s):________________________
Point-To-Point, modem, (Clause 10), baud rate(s): ________________________
LonTalk, (Clause 11), medium: ________________________
BACnet/ZigBee (ANNEX O)
Other: ________________________
1.7. Device Address Binding
Is static device binding supported? (This is currently necessary for two-way communication with MS/TP slaves and
certain other devices.) Yes No
1.8. Networking Options
IRouter, Clause 6 - List all routing congurations, e.g., ARCNET-Ethernet, Ethernet-MS/TP, etc.
IAnnex H, BACnet Tunneling Router over IP
IBACnet/IP Broadcast Management Device (BBMD)
Does the BBMD support registrations by Foreign Devices? Yes No
Does the BBMD support network address translation? Yes No
1.9. Network Security Options
Non-secure Device - is capable of operating without BACnet Network Security
Secure Device - is capable of using BACnet Network Security (NS-SD BIBB)
Multiple Application-Specic Keys:
Supports encryption (NS-ED BIBB)
Key Server (NS-KS BIBB)
1.10. Character Sets Supported
Indicating support for multiple character sets does not imply that they can all be supported simultaneously.
ISO 10646 (UTF-8) IBM™/Microsoft™ DBCS ISO 8859-1
ISO 10646 (UCS-2) ISO 10646 (UCS-4) JIS X 0208
If this product is a communication gateway, describe the types of non-BACnet equipment/networks(s) that
the gateway supports:
This product is a communication gateway. It reects all equipment connected to itself.
The gateway and its products are grouped behind a Network number. This Network number is initialized with
some information coming from the Socomec Network Id of the Product. It can be changed by the user using the
Socomec Easy Conguration Tool. The OID of the gateway itself is 100. Any equipment connected to the gateway
is given an OID ranging from 100 to 247, according to its Modbus Address (OID = 100 + ModbusAddress).
Any modication of the gateway topology will be reected to BACnet.