socomec Green Power 2.0 - MODBUS IN MODULAR PARALLEL SYSTEM CONFIGURATION; COM-SLOTS LOCALISATION

21
ENGLISH
Green Power 2.0 320 to 400 kVA - Ref.: INMGP2401210-GB_12
5. inStallation
1
3
4
2
DELPHYS Green Power
5. 3.4. Handling of battery cabinet
Handling from underneath
Handling can be from the bottom using a lifting truck. Front, rear as well as side bottom panels are available on
the top of the cabinet.
Handling from above
Handling can be by using 4 slings that are at least 1 meter long. The total weight shall not exceed 1500 kg, i.e.
375 kg per eye screw, so please adapt to the weight to be lifted accordingly.
5. 3.5. Dimensions and weights of the battery cabinet
Cabinet 800 1000
Maximum weight for transport (kg) 1700 1800
Maximum weight of blocks (kg) 1450 1500
Maximum weight per shelf (kg) 350 380
WIDTH (mm) 800 1 000
DEPTH (mm)
- oor requirement 815
- Overall dimensions with door handle 830
- door, handle and rear panel excluded 800
HEIGHT (mm) 1925
5. 4.
cabInet posItIonIng
To make transport and handling easier, the sys-
tem is separated into cabinets (or cabinet sets).
The symbol on the front face indicates the
separation points between the cabinets.
The individual cabinet position should corre-
spond with sequence / numbers indicated on
the front view of the system.
(The number of each cabinet is indicated on the right top corner on the inside of the door).
Note : reference should be made to the technical details in the drawing le.