socomec Green Power 2.0 - 7 Communication; M Ultilevel Communication; S Erial Connection Pcb

42
Green Power 2.0 320 to 400 kVA - Ref.: INMGP2401210-GB_12
7.1-1
RJ45
Ethernet
RS232
Modem
5
4
3
2
1
9
8
7
6
RTX–
RTX+
7.2-1
7. 1.
multIlevel communIcatIon
Green Power 2.0 can manage various serial, contact and Ethernet communication channels at the same time.
The 2 communication slots available allow the use of signalling accessories and cards.
Each communication channel is independent; simultaneous connections can thus be made to have various
levels of remote signalling and monitoring (see the § 8 for a detailed evaluation of the functionality of the cards
that can be installed in the slots). The table below shows the possible connections between Green Power 2.0 com-
munication channels and the external devices.
7. COMMUNICATION
Communication levels
* It is possible to use one isolated serial PCB only.
Optional
SLOT 1 SLOT 2 SLOT 3 SLOT 4 SLOT 5
ADC card • • • • •
Serial port* COM2 COM3 COM2
BHC interactive •
NetVision •
Modbus TCP •
SLOT 2
SLOT 1
7. 2.
serIal connectIon pcb
A serial RS232 connector DB9 and an isolated RS485
connector are available on the card (RTX+ and RTX−).
Legend pin RS232 DB9
1 Reserved 4 Reserved 7 Reserved
2 RX for RS232 5 GND for RS232 8 Reserved
3 TX for RS232 6 Reserved 9 Reserved
Isolated RS485
RS232 DB9