On request, Green Power 2.0 can be provided with a Probus protocol converter, installation software, congu-
ration software and user manuals.
7. 4.
By connecting Green Power 2.0 to an Ethernet network, the operating status of Green Power 2.0 can be moni-
tored from any PC connected to the network through an html page.
1. Connect the network cable to the RJ45 port.
2. Congure the network IP address via the mimic panel.
3. Open your favourite web browser.
4. Type the IP address of Green Power 2.0 to display is synoptic.
7.