EasyManua.ls Logo

socomec Green Power 2.0 - 8 Options; DC Card; I Solation Controller; E Xternal Manual Maintenance Bypass

socomec Green Power 2.0
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
Green Power 2.0 320 to 400 kVA - Ref.:
INMGP2401210-GB_12
8.1-1
OUT2
OUT3
IN1 IN3
OUT1
OUT4
IN1 IN2
8. 1.
aDc carD
This card can be congured to control up to four outputs that are normally closed or normally open and up to
three digital inputs. A maximum of two cards can be installed on each unit.
8. OPTIONS
8. 2.
IsolatIon controller
This device continually checks the transformer isolation, displaying an alarm message on the mimic panel.
8. 3.
external manual maIntenance bypass
This device will electrically exclude and isolate Green Power 2.0 (e.g. for maintenance operations) without inter-
rupting the power supplied to the load.
8. 4.
acs pcb
Synchronises Green Power 2.0 output with an external power source (another UPS, even of a different brand,
generator or transformer).
8. 5.
temperature sensor
This allows control of the temperature in the battery room or inside the battery cabinet.

Table of Contents

Other manuals for socomec Green Power 2.0

Related product manuals