The table addresses are written in hexadecimal, beginning with ‘0x’.
Some PLC systems request a relative address starting from 400 (0x0190) or 40001 (0x9C41), on this address it’s
necessary to add the rst address of the MODBUS table.
6. 4. framE Errors managEmEnt
In case of wrong data request, the DELPHYS Green Power answers with the following frame error :
Error function code Error code Cause
80 + code function 1 Function error
80 + code function 2 Addresses error
80 + code function 3 Wrong data
80 + code function 6 busy
80 + code function 8 Write register error
7. CONVENTIONS
11
Delphys green power - Ref.:
IOMDGPJB0910-GB_11
ENGLISH
To Next Page
Loading...
