ITYS 1-3 kVA - 551430A - SOCOMEC
29
EN
• EBM
2
1
3
1. EBM
2. EBM cable
3. Safety instructions
5.3. Installing the unit
Always keep 200 mm of free space behind the UPS rear panel.
Check that the indications on the name plate located on the top cover
of the UPS complies with the AC-power source and the true electrical
consumption of the total load.
1. Connect the UPS input socket to
the AC-power source using the
cable of the protected equipment.
2. Connect the loads to the UPS
using the cables.
Note: the UPS charges the battery as soon as it is connected to the AC-
power source, even if the ON/OFF button is not pressed.
To Next Page
Loading...
