ITYS 6-10 kVA - 551431A - SOCOMEC
40
EN
8. TROUBLESHOOTING
The UPS is designed for durable, automatic operation and also alerts you
whenever potential operating problems may occur. Usually the alarms shown by
the control panel do not mean that the output power is affected. Instead, they are
preventive alarms intended to alert the user.
• Events are silent status information that are recorded into the Event log.
Example = “Battery charging”.
• Alarms are recorded into the Event log and displayed on the LCD status screen
with the logo blinking. Some alarms may be announced by a beep every 1
second. Example = “Battery low”.
• Faults are announced by a continuous beep and red LED, recorded into the
Event log. Example = Out. short circuit.
Use the following troubleshooting chart to determine the UPS alarm condition.
To Next Page
Loading...
