socomec Modulys GP Green Power 2.0 Series - Technical Specifications

53EN
Operating modes 'MODULYS GP' 100 kW UL - Ref.: IOMMODGPXX09-EN 03
13. TECHNICAL SPECIFICATIONS
Number of modules 1 2 3 4 5
Power kW 25 50 75 100 100
Power kVA 25 50 75 100 100
Input
Input mains voltage 3ph 480 V (+15/-15%) up to -40% @ 50% of nominal load
Input mains frequency Hz 60 +/-10%
Input power factor ≥ 0.99
(1)
Total harmonic input current distor-
tion (THDi)
≤ 3% (@: Pn, Resistive load, Mains THDv ≤ 1%)
Output
Output voltage (three phase) V 480
Frequency Hz 60
Total output voltage distortion
(THDv)
% ≤ 1% (@ Pn, Resistive load)
Overload
(2)
% 125% for 10 minutes, 150% for 1 minute
Overload
(2)
10 min kW 125
1 min kW 150
Crest Factor ≥ 2.7 ≥ 3.3
Bypass
Bypass input voltage V Nominal output voltage ±15%
Bypass input frequency Hz 60 +/-2% selectable (±8% if GENSET is used)
Stored energy mode of operation
Number of battery blocks (VRLA) From 18+18 to 24+24
Environmental
Operating temperature °F / °C 32 to 104 °F / 0 to +40 °C
(3)(4)
Storage temperature °F / °C 23 to 122 °F / -5 to +50 °C
Relative humidity % 95% condensation-free
Altitude (max) ft 3280 ( 9840 with derating)
Acoustic noise at 1m dBA ≤ 58
Required air capacity CFM 1178
Dissipated power (max) W 5200 @ Pn (3000 @ 56 kW)
Dissipated power (max) BTU/h 17750 @ Pn (10250 @ 56 kW)
Dimensions and Weight
Dimensions (W x D x H) ft / mm 1.97 x 2.92 x 6.48 ft. / 600 x 890 x 1975 mm
Empty cabinet lbs / kg 1043 lbs / 473 kg
UPS module lbs / kg 75 lbs / 34 kg
Bypass module lbs / kg 55 lbs / 25 kg
Battery module lbs / kg -
5
Standard
Safety UL1778 CSA C22.2 N. 107.3-05
EMC FCC part15 Class A
Performance IEC 62040-3 (VFI-SS-111)
Degree of protection standard NEMA 1 (IP20)
SEISMIC OSHPD Pre-approval (optional)
1. Pout ≥ 50% Sn.
2. Initial Condition Pout ≤ 80% Pn.
3. For best battery lifetime the suggested temperature range
is 59 °F ÷ 77 °F.
4. According to IEC62040-3.
5. Modular battery cabinet.