English
NeTYS 400-1000 VA Product Manual
COMMUNICATION
5. COMMUNICATION
The UPS provides excellent protection against interruptions or imperfections in the mains power supply. In
these cases the computer (load) is powered by the UPS using battery power until this runs out.
Various software applications and communication options are available to optimise operation of the UPS and
to correctly manage shutdown when back-up power ends. The status of the UPS can be monitored, keeping
track of all the mains failures and battery discharges so as to activate an automatic and orderly procedure to
close the programs and shutdown the system. When mains power returns the system will restart
automatically.
All NeTYS models are equipped with RS232 and USB communication interface (not available on the NeTYS
PE 400 model).
COMMUNICATION SOLUTIONS
Uni Vision local management software for local shutdown of Windows™ & Linux systems.
Free on http://www.socomec.fr/page_uk/lien_prod_ups.htm
RS232/USB INTERFACE
Communication with the server can take place directly via the RS232/USB interface.
In addition to local or networked shutdown it is possible to perform full monitoring of the electrical parameters
regarding battery status and the automatic programming of the UPS start-up and shutdown procedures.
For a complete description of the software features, refer to the Uni Vision.
SECTION 1 !
9
To Next Page
Loading...
