English
NeTYS 400-1000 VA Product Manual
TECHNICAL DATA
7. TECHNICAL DATA
NeTYS PE
400 600 800 1000
Power 400VA (240W) 600VA (360W) 800VA (480W) 1000VA (600W)
Technology Line Interactive Step Wave with AVR voltage stabiliser
INPUT
Voltage
170 - 280 V
Frequency 50 / 60 Hz with automatic selection
Mains connection IEC320 socket
OUTPUT
Voltage
(Normal Mode with AVR)
The AVR increases (boosts) the output voltage by 18% when the input
voltage drops below 90% of the nominal value,
The AVR decreases (bucks) the output voltage by 15% when the input
voltage rises above 110% of the nominal value.
Voltage
(in Battery Mode)
230V ± 10%
Frequency 50 / 60 Hz
Wave form Stepwave
Transfer time 2-6 milliseconds (typical)
Protection Overload, deep discharge and short circuit
Load connection socket
IEC320
3 (C13) 4 (C13)
BATTERY
Typical back-up time
PC+15” LCD monitor
8 min. 15 min. 20 min. 45 min.
Battery recharge Under permanent charge even when the UPS is off (mains present)
REPORTING AND COMMUNICATION
Communication interface - RS232/USB
Local communication software -
UPS Management software – Windows™ & Linux
(free download)
Telephone protection
-
Telephone line/modem/ADSL suppressor: RJ11
ENVIRONMENT
Noise level at 1 meter < 45dBA
Temperature 0- 35°C (15- 25°C for optimum battery life)
Environment Altitude: 2000 mt, humidity: 90% non-condensing
Reference standards EN50091-2 (EMC), EN62040-1-1 (safety)
WEIGHT AND DIMENSIONS
Dimensions (WxDxH mm) 99 x 334 x 143 140 x 370 x 180
Net weight 5.0 Kg 6.1 Kg 6.6 Kg 13.6 Kg
SECTION 1 !
11
To Next Page
Loading...
