socomec SNMP Card II - SNMP Control Functions

19GB
SNMP CARD II - SOCOMEC
plifi ed Chinese” and “Auto”. SNMP Card Home Page will be displayed using the language
set in the Web Browser if “Auto” is selected. (*): to be added soon.
12. Temperature Unit: Display the Temperature in Celsius or Fahrenheit.
Figure 3-10 SNMP Confi guration
SNMP C
ONTROL
Allows the user to enable or disable the communication protocols available in the SNMP CARD
and affect a restart and reset of the SNMP CARD internal parameters. Some of the items in this
menu are visible only to administrator with read/write access rights. (Figure 3-11)
1. BOOTP/DCHP Status: Enabling or disabling the Boot Protocol (BOOTP) / Dynamic Host
Confi guration Protocol (DHCP). These protocols are Internet standards used to get a dynam-
ic IP address from a BOOTP / DHCP server.
2. Ping Echo: Enabling or disabling the SNMP CARD to respond to Ping requests.
3. Network Upgrade: Enabling or disabling the Trivial File Transfer Protocol (TFTP) upgrade con-
trol. You can use upgrade.exe on Windows via TFTP to upgrade SNMP CARD fi rmware.
4. Telnet Connection: Enabling or disabling the terminal to server application (Telnet) control
process. The standard port is 23.
5. HTTP Support: Enabling or disabling the HTTP connection with the SNMP CARD. The user
may confi gure HTTP protocol to use a port number other than standard HTTP port (80).
6. SNMP Support: Enabling or disabling the SNMP connection with SNMP CARD. The user
may confi gure the SNMP protocol to use a port number other than the standard SNMP port
(161).
7. Reset Agent to Default: Instructs SNMP CARD to reset parameters to factory default value.
8. Restart Agent: Instructs SNMP CARD to restart.