Sofar solar 110KTL - 4.3. Required Tools

80-136KTL User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 18 -
4.3. Tools
Prepare tools required for installation and electrical connection as following
table:
Figure 4-2 Installation tools
No
Tool
Description
Function
1
Hammer Drill
Recommend
drill @ 10mm
Used to drill holes on the wall
2
Screwdriver
Use to tighten and loosen
screws when installing AC
power cable
Use to remove AC connectors
from the product
3
Removal Tool
Remove PV Connector
4
Wire Stripper
Used to peel cable
5
With an open
end of larger
than or greater
than 32 mm
Used to tighten expansion
bolts