Sofar solar 3.3-12KTL-X - Tools

SOFAR 3.3K~12KTL-X User manual
All rights reserved
© Shenzhen SOFARSOLAR Co ., Ltd.
19
3.3. Tools
Tool
Model
Function
Hammer drill
With a drill bit of
Φ8.0
Used to drill holes on the wall
R 45 crimping tool
N/A
Used to prepare RJ45 connectors for
Communications cables
Adjustable wrench
With an open end of
larger than or greater
than 32 mm
Used to tighten expansion bolts
Flat-head screwdriver
M4

Used to tighten or loosen screws when
installing AC power cables.

Used to remove AC connectors from
the SOFAR 3.3K~12KTL
-X.
Note: The torque
screwdriver and flat-
head screwdriver are alternative.
Socket wrench
M5
Used to
tighten ground bolt
Rubber mallet
N/A
Used to hammer expansion bolts into
holes
Removal tool
N/A
Used to remove DC connectors from the
11 1PCS Manual
12 1PCS The warranty card
13
1PCS Certificate
Table 3-1 Component list