Sofar solar 3.3-12KTL-X - Figure 4-17 Negative MC4 Connector

SOFAR 3.3K~12KTL-X User manual
All rights reserved
© Shenzhen SOFARSOLAR Co ., Ltd.
36
Figure 4-17 Negative MC4 connector
1. Housing 2. Cable gland 3. Negative connector
Note: Please ensure that the correct gender pin goes with the correct
housing.
Procedure
Step 1: Remove cable glands from the positive and negative connectors.
Step 2: Remove the insulation layer with an appropriate length from the
positive and negative power cables by using a wire stripper as show in Figure
4-16.