Sofar solar 3KTLM-G3 - 3. Installation; Installation notes; 3.1. Installation Process

SOFAR 3K~6KTLM-G3 User manual
Copyright © Shenzhen SOFAR SOLAR Co., Ltd
- 11 -
3. Installation
Outlines of this chapter
This topic describes how to install the SOFAR 3K~6KTLM-G3 .
Installation notes
3.1. Installation Process
Figure 3-1 Installation flowchart
3.2. Checking Before Installation
Checking Outer Packing Materials
Packing materials and components may be damaged during transportation.
Do NOT install the SOFAR 3K~6KTLM-G3 on flammable material.
Do NOT install the SOFAR 3K~6KTLM-G3 in an area used to store
Flammable or explosive material.
Danger
The enclosure and heat sink are very hot while the inverter is
working, therefore do NOT install the SOFAR 3K~6KTLM-G3 in
places where you might touch them inadvertently.
Caution
Consider the weight of SOFAR 3K~6KTLM-G3 when transporting
and moving the inverters.
Choose an appropriate mounting position and surface.
Assign at least two persons to install the inverter.
Attention
Prepare installation
tools
Determine
installation location
End
Install the
inverter
Install the rear
panel
Moving the
inverter
Check before
installation
Start