SOFAR 3K~6KTLM-G3 User manual
Copyright © Shenzhen SOFAR SOLAR Co., Ltd
1. Basic safety information
If you have any question or problem when you read the following
information, please contact Shenzhen SOFARSOLAR Co. Ltd.
Outlines of this chapter
Safety instruction
Introduce the safety instruction when install and operate the equipment.
Symbols and signs
Introduce the safety symbols on the inverter.
1.1. Safety instructions
Read and understand the instructions of this manual and be familiar with
relevant safety symbols in this chapter, prior to installing and troubleshooting
the equipment.
Prior to connecting the inverter to the grid, please contact the local distribution
network service provider permission in accordance to the national and state
requirements. This can only be performed by qualified electrical
engineer/electrician.
Please contact the nearest authorized service centre if any maintenance or repair
is needed. Contact your distributor for the information of the nearest authorized
service centre. Do NOT attempt to repair it by yourself, it may cause injury or
property damage.
Before installing and maintaining the equipment, turn the DC switch isolators
OFF to cut off the high voltage DC from the PV array. You can also turn the
switch in the PV combiner box OFF to cut off the high voltage DC to prevent
serious injuries or damage to property.
To Next Page
Loading...
