Sofar solar KTLX-G3 Series - Tools

SOFAR 15~24KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
- 17 -
3.3. Tools
Prepare tools required for installation and electrical connection as following
table:
Figure 3-2 Installation tools
No
Tool
Description
Function
1
Hammer Drill
Recommend
drill @ 60mm
Used to drill holes on the wall
2
Screwdriver
Use to tighten and loosen
screws when installing AC
power cable
Use to remove AC connectors
from the product
3
Removal Tool
Remove PV Connector
4
Wire Stripper
Used to peel cable
5
M6 hexagon
wrench
M6 use to uninstall and install
the front top cover and down
cover
6
Crimping Tool
Use to crimp cable on grid
side, load side and CT
extensive cable