How to resolve BatOTD error on Sofar solar ME 3000SP?
To resolve the BatOTD error on your Sofar solar Inverter, ensure that the battery is placed in a well-ventilated area. Additionally, try decreasing the maximum discharge (A) or/and maximum charge (A) settings to see if the problem is resolved.
What to do if Sofar solar ME 3000SP Inverter shows BatUTC error?
If your Sofar solar Inverter displays a BatUTC error, try to increase the ambient temperature of the battery.
What to do if Sofar solar ME 3000SP shows GridOVP?
If the Sofar solar Inverter displays a 'GridOVP' alarm occasionally, it might be due to temporary abnormalities in the electrical grid. The ME 3000SP is designed to automatically resume normal operation once the grid stabilizes. However, if the alarm appears frequently, verify that the grid voltage and frequency are within the acceptable range. If they are not, contact SOFAR technical support. If the voltage and frequency are normal, inspect the AC circuit breaker and wiring of the ME 3000SP. If wiring is correct but the problem persists, contact SOFAR technical support to adjust the grid protection settings after getting approval from your local electrical grid operator. If the wiring and voltage/frequency are correct and the alarm still occurs, try changing the country code to 22 and res...
General| Brand | Sofar solar |
|---|---|
| Model | ME 3000SP |
| Category | Inverter |
| Language | English |
Electrical installation and maintenance must be carried out by competent electricians.
The battery has been~60% charged before being delivered.
Symbols related to security on the inverter. Read and understand.
Details on the ME 3000SP's inspection, packaging, and handling.
List of components and mechanical parts included with the inverter.
Requirements for the location where the inverter should be installed.
List of tools required for the proper installation of the inverter.
Guidelines for selecting the optimal mounting location for the inverter.
Step-by-step instructions for mounting the inverter on the wall.
Procedure for connecting the battery wires to the inverter.
Connecting the logic interface for control and communication.
Connecting current transformers, RS485, and NTC sensors.
Instructions for connecting the inverter to the electrical grid.
Connecting critical loads for emergency power supply.
Procedure for installing optional communication modules.
Description of the function of each button on the inverter.
Explanation of the status indicated by different LED lights.
Table detailing inverter status and corresponding light indicators.
Pre-operation checklist to ensure correct setup and connections.
Crucial steps for initial power-on and setup of the inverter.
Setting system parameters like time, country, and battery type.
Accessing and navigating through the inverter's main menu options.
Access and configure various settings like battery parameters.
View current and historical event logs for troubleshooting.
Display of product SN, software version, hardware version, etc.
Procedure for updating the inverter's firmware.
View energy generation and consumption data over time.
Check warning, fault messages, or fault codes shown on the inverter screen.
Information on Earth Fault Alarm and its monitoring.
Details on various error codes, their descriptions, and solutions.
Key parameters related to battery type, voltage, and capacity.
Specifications for AC output power, current, voltage, and frequency.
Parameters related to inverter efficiency, topology, and safety.
Ambient temperature, humidity, and operating altitude specifications.
Noise, weight, dimensions, display, and warranty information.
Specifications for the Emergency Power Supply function.
Explanation of terms used in the warranty conditions.
Conditions and limitations of the product's warranty.
Exclusions and limitations of SOFARSOLAR's liability.
To Next Page