Sofar solar ME3000SP - Page 16

ME3000SP User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
13
Fig. 11 CT wire extension
CT wire
Extension cable (network cable)
ME 3000SP
Red
Orange / white orange / brown / white brown
CT+
Black
Green / white green / blue / white blue
CT-
Fig. 12 CT / RS485 / NTC connection
Step 3: Loosen 4 screws (part A) using a screwdriver (fig. 13)
Step 4: Remove the waterproof cover (part B), loosen the cable gland (part C), then remove the stopper (part
G)
Step 5: Route CT cable through the cable gland, connect CT cable to CT terminal, then insert CT terminal
into corresponding ports.
Step 6: One communication cable is provided in the ME3000SP accessory bag. One inverter end, one BAT
end.
Route the communication cable (inverter end) through the cable gland, insert the 4P4C connector to
ME3000SP CAN port. Insert the 8P8C connector (BAT end) to PYLONTECH battery CAN port.