SOFAR 3.3~12KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
If multiple SOFAR 3.3~12KTLX-G3 are used, connect all SOFAR 3.3~12KTLX-G3 in
daisy chain mode over the RS485 communication cable. Set different Modbus
address (1~31) for each inverter in LCD display.
Figure 4-20 Multi SOFAR 3.3~12KTLX-G3 connecting Communications
Register remote monitoring of SOFAR 3.3~12KTLX-G3 at its relevant website or
APP according to monitoring device SN.
WIFI / Ethernet
By the USB acquisition stick (WIFI / Ethernet), transfer the inverter power
output information, alarm information, operation state to the PC terminal or
local data acquisition device, then uploaded to the server. Register remote
monitoring of SOFAR 3.3~12KTLX-G3 at its relevant website or APP according to
monitoring device SN.
Figure 4-21 Connect one USB acquisition stick (WIFI version) to wireless router
To Next Page
Loading...
