SOFAR 3.3~12KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
Figure 4-14 DC cable connection(4)
Figure 4-15 Use a multimeter to check the positive and negative electrodes
Note
：
Please use multimeter to make sure the PV array positive pole and
negative pole!
Dealing：If need to remove the PV connector from inverter side, please use the
Removal Tool as below diagram, move the connector gently.
Before, moving the positive and negative connector, please
make sure “DC Switch” is on OFF position.
Figure 4-16 Removal DC connector
To Next Page
Loading...
