SOFAR 3.3~12KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
Figure 4-7 SOFAR 3.3~12KTLX-G3 Multi-core Cable picture
Wiring Procedure as following:
Step 1: Remove the AC waterproof cover screw with a screwdriver, and take out
the stopper in the PG waterproof joint.
Figure 4-8 Removing AC waterproof cover diagram
Step 2: Select the appropriate cable diameter according to table 4-1, process
the cable according to the following picture size requirements, and then pass
through PG waterproof joint;
R type terminal, Insulating sleeve,
RNBL5-4 (10-12awg). terminal shall not be exposed.