Start Up
The network can be found in about
30 seconds after turning on the Wi-Fi
router.
Hold down
the power button
for 5 seconds.
①Signal Strength
②Network Type
③Carrier Name
④Connectivity
* Red : No Connection
⑤Battery Life
⑥Data traffic
⑦Connected users
⑧Information
。
Getting started
Settings
Connecting a Smartphone
Join Network
Select the SSID beginning with
"601HWa".
1. Tap on the "Settings" icon.
2. Select "Wi-Fi"
3. Turn on "Wi-Fi".
4. Select the network "601HWa-...".
5. Enter password
. Done!
1. Click the "Network" icon on the task bar on the lower right
. of the PC screen.
2. Select the network "601HWa-...".
3. The network security key input screen will be displayed.
. Enter the password, then click "Next".
6 4. Click "YES" at the sharing setting confirmation screen.
5. It's done when "connected" is displayed.
Connecting a Windows 10 PC
Connecting via USB
Menu Icons
⑨Simple setting
⑩Wi-Fi
⑪Settings
⑫Power save setting
⑬WPS
⑭Device Info
⑮Wi-Fi Spot
⑯Help
* Detailed instructions for menu icons
Power-OffBattery Life
①②
④ ⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑬ ⑭
⑯
START GUIDE
Wi-Fi Setup Start Guide
Anyone can do it!
SoftBank 601HW
1. 2.
The password is on the back of Wi-Fi
router.
Enter Password
3.
*For more information, please turn over page.
601HW
You can access the Internet once
you join the network.
①To put in standby mode : press and hold the power button on the top side of the
router. Select " Power off" from the menu on the monitor.
②To completely shut down : don't press the "Power off" on the screen, but continue
to press on the power button until it turns off.
Continuous operating time of
the batteries is about 4 hours.
To save the battery life, please turn
your Wi-Fi off when not in use.
*The battery is consumed even when
the screen is off.
Requires a device driver to be installed.
The driver is automatically installed when you connect the Wi-Fi router to your PC via USB.
However, if the installation doesn't start, manually install the device driver by selecting from
the "Devices and drives" in File Explorer on your PC.