Battery Storage
In backup: Up to 3 inverters, 88.2kWh with SolarEdge Energy Bank
Batteries
EV Charging Smart EV ready - separate EV charger and cabling required
ADDITIONAL FEATURES
Supported Communication Interfaces
RS485 - Modbus devices, RS485 - SE protocol, Ethernet, Wi-Fi,
EnergyNet
Integrated AC, DC and Communication Connection
Unit
Yes
Inverter Commissioning
With the SetApp mobile application using built-in Wi-Fi Access
Point for local connection
STANDARD COMPLIANCE
Safety IEC-62103 (EN50178), IEC-62109, AS/NZS3100
Grid Connection Standards AS/NZS4777
Emissions IEC-61000-6-2, IEC-61000-6-3, IEC-61000-3-11, IEC-61000-3-12
INSTALLATION SPECIFICATIONS
AC Output and DC Input Conduit Size / Wire Cross
Section
32mm Maximum / 1-16 mm2
Dimensions with Connection Unit (HxWxD) 450 x 370 x 174 540 x 370 x 185 mm
Weight with Connection Unit <15 <20 kg
Communication Glands 2
Noise <25 <50 dBA
Cooling Natural convection
Operating Temeprature Range -40 to +60
(8)
˚C
Protection Rating IP65 - Outdoor and Indoor
SolarEdge-Single Phase Energy Hub Inverter MAN-01-00812-1.1
64
To Next Page
Loading...
