(1)
These specifications apply to inverters with part numbers SExxxxH-AUS3xxxxx and connection unit model number DCD-1PH-AU-PxH-F-x.
(2)
Not designed for standalone applications and requires AC for commissioning.
(3)
Rated AC power in Backup Operation are valid for installations with multiple inverters. For a single backup inverter operation, rated AC power in backup is 90% of
the stated value.
(4)
Rated current in backup operation are valid for installations with multiple inverters. For a single backup inverter operation, rated current in backup is 90% of the
stated value.
(5)
A higher current source may be used; the inverter will limit its input current to the values stated.
(6)
Support for 2 LG Prime batteries with compatible inverter firmware .
(7)
For consumption metering current transformers should be ordered separately: SE-CTML-0350-070 or SE-ACT-0750-100 or SE-ACT-0750-250.
(8)
Full power up to at least 50°C; for power de-rating information refer to: https://www.solaredge.com/sites/default/files/se-temperature-derating-note.pdf
SolarEdge-Single Phase Energy Hub Inverter MAN-01-00812-1.1
65
To Next Page
Loading...
